Arief Yudhawarman

Masih belajar buat blog

Consider r2q change

leave a comment »

Sumber: Consider r2q change:

It is documented in HTB manual. The complaint was not displayed before and sharing was silently wrong.
Quantum of leaf should be between 1500 and 60000 and it is computed as rate/r2q (or can be supplied independly). So that if your maximal leaf rate is 1Mbit (120000Bps) then r2q should be 3. If max rate is 10kbit (1200Bps) then r2q should be 1. It is warning only and will not affect functionality, only precision.

Smallest rate : 16kbit = 2 kilobyt / r2q (=10) = 200. And this is < 1500. So you get warnings. Biggest rate : 100mbit = 12.5 mbyte / r2q = 1.2 Mbyte > 60.000. So you get warnings.

If you do tc qdisc add dev eth0 root handle 1: htb default 10 r2q 1
Smallest rate : 16kbit = 2kilobyte / r2k = 2000. And this is > 1500. So no warnings.
Biggest rate : 100mbit = 12.5 mbyte / r2q = 12.5 Mbyte > 60.000. So you get warnings.

But you can overrule the quantum :
tc class add dev eth0 parent 1:1 classid 1:11 htb rate 128kbit burst 2k quantum 60000

Quantum is used when 2 classes are getting more bandwidth then the rate. So it’s only important for sharing the remaining bandwidth. In that case, each class may send quantum bytes.

Written by awarmanf

December 29, 2009 at 3:19 am

Posted in Linux, traffic control

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: